Weldtool provides a variety of hardfacing products, from electrodes to wires.
Hardfacing Electrodes
| Product Name | Uses |
|---|---|
| Weldman 1 | This is a manganese electrode for buildup of austenitic manganese steel parts subject to high impact loading. Buildup/joining Mn steel to Mn steel. |
| Weldman 3 | High chromium, high manganese alloy used in the rebuilding of manganese parts subject to severe impact loading. Buildup/joining Mn steel or C steel. |
| Weldite A | Highest deposit rate. Best for parts subject to impact and abrasion. Use to rebuild crusher rolls, dredge pump shells, and other parts. |
| Weldite D | Hardest hardfacing electrode. Best for parts subject to impact and abrasion. |
| Weldite F | Excellent general purpose hardfacing electrode. Low cost. Best for parts subject to impact and abrasion. |
| Weldite M | Great weldability and great for general hardfacing. Best used on parts subject to impact and abrasion. |
| Weldite 35 | Great weldability. Can be applied to C and Mn steel. Best for parts subject to impact and abrasion. |
| Weldtung 60 | Excellent abrasion resistance. Contains tungsten carbide for metal-earth abrasion. |
| Weld V-Tung | Has deposits that contain vanadium carbides which are similar to the wear resistance of tungsten carbide with higher impact strength. The vanadium carbides dissolve and reform in the deposit. |
| Mangweld 44 | Mangweld 44 is an electrode that can be used for overlay or build-up on carbon and low alloy steels as well as manganese steel. |
Hardfacing Wires
| Product Name | Uses |
|---|---|
| Weldman A1 | Produces a high strength deposit that work hardens rapidly under impact. Best used for buildup/joining Mn steels where parts are subject to impact and abrasion. Self-shielding. |
| Weldman A3 | High chromium, high manganese alloy used in the rebuilding/joining of manganese/ carbon steel parts subject to severe impact loading. Self-shielding. |
| Weldamatic 969-G | 969-G is gas-shielding. It provides good impact and abrasion resistance. Used for metal-metal applications and metal-earth parts. Can be applied to Carbon, alloy, and Mn steels. |
| Weldamatic 969-O | 969-O is self-shielding. It provides good impact and abrasion resistance. Used for metal-metal applications and metal-earth parts. Can be applied to Carbon, alloy, and Mn steels. |
| Weldamatic D | Best for parts subject to impact and abrasion. Highest hardness of iron based alloy. Can be applied to C, alloy, Mn steels and cast iron. |
| Weldamatic R-101 | Great for parts subject to abrasion. Not machinable or forgeable. |
